2J4841PCF
Electrical Specification
Connection (LTE)
Frequencies
4G/LTE (699-960/1710-2690 MHz)
AMPS (850 MHz)
GSM (900 MHz)
DCS (1800 MHz)
PCS (1900 MHz)
3G (UMTS 2.1 GHz)
AMPS (850 MHz)
GSM (900 MHz)
DCS (1800 MHz)
PCS (1900 MHz)
3G (UMTS 2.1 GHz)
Specification
Impedance: 50 Ohm
Polarization: Linear
Gain: 2.4 dBi Max.
VSWR: < 2.0:1
Power handling: 25 W
Polarization: Linear
Gain: 2.4 dBi Max.
VSWR: < 2.0:1
Power handling: 25 W
Default Connections
Cable type: LMR100 Standard
Cable length: 300cm
Connector type: SMA MALE NICKEL
Cable length: 300cm
Connector type: SMA MALE NICKEL
Connection (Navigation)
Frequencies
GALILEO E1 (1575.42 MHz)
BeiDou (1561.098 MHz)
GPS (1575.42 MHz)
GLONASS (1592 - 1610 MHz)
BeiDou (1561.098 MHz)
GPS (1575.42 MHz)
GLONASS (1592 - 1610 MHz)
Specification
Impedance: 50 Ohm
Noise figure: 1.5 dB Typ
Polarization: RHCP
LNA Gain: 28 dB @ 2.7 V
VSWR: < 1.4:1
Voltage supply: 1.5 V – 3.6 V
Current: 9 mA Typ
Power (max.): 24.3 mW Typ
Note: Pre-Filter
Noise figure: 1.5 dB Typ
Polarization: RHCP
LNA Gain: 28 dB @ 2.7 V
VSWR: < 1.4:1
Voltage supply: 1.5 V – 3.6 V
Current: 9 mA Typ
Power (max.): 24.3 mW Typ
Note: Pre-Filter
Default Connections
Cable type: LMR100 Standard
Cable length: 300cm
Connector type: SMA MALE NICKEL
Cable length: 300cm
Connector type: SMA MALE NICKEL
General Specification
Specification
IP rating: IP67, IP69
Operating temperature: -40°C to +85°C
Note: For use on Non-metallic surfaceNote: Antenna 2J4841PGFR equipped with 10K resistor for antenna detection is available.
Operating temperature: -40°C to +85°C
Note: For use on Non-metallic surfaceNote: Antenna 2J4841PGFR equipped with 10K resistor for antenna detection is available.
Dimensions
Max width: 35mm
Max length: 83mm
Max thickness: 13.3mm
Max length: 83mm
Max thickness: 13.3mm
Mounting
Adhesive Mount
Mounting
Download datasheet
